Electropneumatic applicators allow you to glue large surfaces, thanks to their high power (400 – 1,000 W) and the support provided by the pneumatic advancement during the extrusion phase. Thanks to the pressure gauge they are equipped with, you can control the air pressure in the advancement system and therefore dose the amount of glue you want to extrude. The pneumatic advancement also lightens the physical effort of operators compared to the classic manual gun with mechanical advancement.
Industrial heavy-duty glue gun
Power: 600 Watts
Weight: 1.25 kg
Fixed Working Temperature: + 195°C
For adhesives in cartridges/shots/slugs Ø 43 mm or granules
Tank Capacity: 200 ml
Power Supply: compressed air
Operating Pressure: 1.5/6 Bar
Standard Nozzle: 1.5 mm
Power: 400 Watts
Voltage: 120 V and 230 V
Extrusion Capacity: 2800-3000 g/hour
For adhesives in cartridges/shots/slugs Ø 43 mm
Operating Temperature: 195° C
Weight: 1.15 kg
Power: 500 Watts
Voltage: 220 V
Extrusion Capacity: 4,000 g/hour
Working Temperature: 205° C
Pressure: 4 – 6 bar
For adhesives in cartridges/shots/slugs Ø 43 mm
Weight: 1.2 kg
Interchangeable nozzle
Power: 600 Watts
Weight: 1.25 kg
Working Temperature: + 195°C
For adhesives in cartridges/shots/slugs Ø 43 mm / granules / pillows
Tank Capacity: 200 ml
Extrusion Capacity: 3000 g/hour
Power Supply: compressed air
Operating Pressure: 1.5 – 6 Bar
Standard Nozzle: 1.5 mm
Power: 600 Watts
Weight: 1.4 kg
Working Temperature: 40 – 250°C
For adhesives in cartridges/shots/slugs Ø 43 mm / granules / pillows
Tank Capacity: 200 ml
Extrusion Capacity: 3500 g/hour
Power Supply: compressed air
Operating Pressure: 2 – 6 Bar
Standard Nozzle: 1.5 mm
Electronic temperature control
Automatic temperature reduction
Power: 500 Watts
Voltage: 120 V and 230 V
Extrusion: 42 kg/hour
Pressure: 7 bar
For adhesives in cartridges/shots/slugs Ø 43 mm
Temperature control – standard thermostat at 180°C
Spray size adjustment
Heating Time: approx. 10 minutes
Potenza: 1.000 Watt
Tensione: 220 V
Capacità di Estrusione: 5.500 g/ora
Temperatura di lavoro: +205°C
Pressione: 4/6 bar
Per adesivi in shots Ø 43 mm
Peso: 1,2 kg
Ugello Intercambiabile
Potenza: 600 Watts
Peso: 1,5 kg
Temperatura di lavoro: 40/210°C Working temperature: 40/210°C
Per adesivi in shot Ø 43 mm/granuli/pillows
Capacità : 200 ml
Controllo Temperatura: elettronico
Forniture accessorie: Applicatore, set di strumenti, staffa di lavoro/postazione di lavoro (opzionale)
Pressione di esercizio: 1,5/6 Bar
Ugello standard: 1,5 mm
Tempo di riscaldamento: 25 min.
Potenza: 600 Watts
Peso: 1,75 kg
Temperatura di lavoro: +40/210°C
Alimentazione: aria compressa
Pressione di esercizio: 1,5 – 6 Bar
Ugello standard: 3 mm
Controllo elettronico della temperatura
Per cartucce da 310 ml
Potenza: 600 Watts
Peso: 1,35 kg
Temperatura di lavoro: +40/210°C
Per adesivi in shot Ø 43mm/granuli/pillows
Capacità di estrusione: 3200 g/ora
Impugnatura ergonomica
Ugello standard: 1,5 mm
Controllo elettronico della temperatura
Riduzione automatica della temperatura